Hi Folks
I've attached my first datalog after getting the wideband hooked up. KAMRF is 1, wideband and LAMBSE seem very close. From what I can tell it doesn't appear to need any correction at idle, but if so, can you please explain how? I've read a million times and I suppose i'm a better learner when given an example and told where to look for things.
Thanks for your help
Steven
First datalog
First unread post • 5 posts
• Page 1 of 1
First datalog
by Thefoxmulder » Fri Feb 09, 2018 6:57 pm
You do not have the required permissions to view the files attached to this post.
- Thefoxmulder
- General Poster
- Posts: 6
- Joined: Mon Dec 18, 2017 2:23 pm
- Name: Steven
- Vehicle Information: 1993 5.0
A9L
F303
Windsor heads
5 speed
Explorer intake
Bolt ons
19lb EV6 inj
94/95 MAF
Stock intake
65mm Accufab TB
Re: First datalog
by decipha » Fri Feb 09, 2018 8:40 pm
your fuel error is 1 and ipsibr is at 0
theres nothing to correct
theres nothing to correct
-
decipha - Tooner
- Posts: 15008
- Joined: Mon Jul 15, 2013 5:29 pm
- Location: New Orleans, LA
- Name: Michael Ponthieux
- Vehicle Information: Supercoupin' x10
90 (4x 5spds) - Dante, Ruby, Daja, Ava
91 4r70w - Skarlett
92 (2x) 5spd & auto - Bianqa, Andrea
93 auto - Danika
94 5spd Rionda
95 auto Aisha - Vehicle 2 Information: Others:
00 Lincoln LS - Luanda
98 Camaro SS - Bounquisha
02 Harley F-150 - Sasasha
03 Marauder - DyShyKy
00 Explorer 5L - Bernyce
Re: First datalog
by Thefoxmulder » Mon Feb 12, 2018 2:27 pm
Question,
Looking at the logs, I see the wideband shows a running average of 1.033. Lambse under the MAF hist table is a running average of .990. Both at 180 maf count. KAMRF is 1.0
Therefore, to dial in fuel for wideband to match lambse, 1.033-.990+1= 1.043 is my correction
I need to apply this to the 180 maf count cell in FN036 by using 1.043 x 25 (the value in the kg/hr cell next to 180). Therefore my new value would be 26.043.
Correct?
Looking at the logs, I see the wideband shows a running average of 1.033. Lambse under the MAF hist table is a running average of .990. Both at 180 maf count. KAMRF is 1.0
Therefore, to dial in fuel for wideband to match lambse, 1.033-.990+1= 1.043 is my correction
I need to apply this to the 180 maf count cell in FN036 by using 1.043 x 25 (the value in the kg/hr cell next to 180). Therefore my new value would be 26.043.
Correct?
- Thefoxmulder
- General Poster
- Posts: 6
- Joined: Mon Dec 18, 2017 2:23 pm
- Name: Steven
- Vehicle Information: 1993 5.0
A9L
F303
Windsor heads
5 speed
Explorer intake
Bolt ons
19lb EV6 inj
94/95 MAF
Stock intake
65mm Accufab TB
Re: First datalog
by Thefoxmulder » Tue Feb 13, 2018 12:00 pm
Hoping to get some feedback so I know if I'm really really off or not.
- Thefoxmulder
- General Poster
- Posts: 6
- Joined: Mon Dec 18, 2017 2:23 pm
- Name: Steven
- Vehicle Information: 1993 5.0
A9L
F303
Windsor heads
5 speed
Explorer intake
Bolt ons
19lb EV6 inj
94/95 MAF
Stock intake
65mm Accufab TB
Re: First datalog
by decipha » Tue Feb 13, 2018 3:49 pm
your wideband is wrong, in closed loop a wideband == 1.00 average
no, the maf history table IS THE FUEL ERROR, it already does the fuel error for you so you simply apply that correction to the maf voltage
go to 180 and multiply the flow (25) by 0.99
/done, its that simple
no, the maf history table IS THE FUEL ERROR, it already does the fuel error for you so you simply apply that correction to the maf voltage
go to 180 and multiply the flow (25) by 0.99
/done, its that simple
-
decipha - Tooner
- Posts: 15008
- Joined: Mon Jul 15, 2013 5:29 pm
- Location: New Orleans, LA
- Name: Michael Ponthieux
- Vehicle Information: Supercoupin' x10
90 (4x 5spds) - Dante, Ruby, Daja, Ava
91 4r70w - Skarlett
92 (2x) 5spd & auto - Bianqa, Andrea
93 auto - Danika
94 5spd Rionda
95 auto Aisha - Vehicle 2 Information: Others:
00 Lincoln LS - Luanda
98 Camaro SS - Bounquisha
02 Harley F-150 - Sasasha
03 Marauder - DyShyKy
00 Explorer 5L - Bernyce
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: Google [Bot], ozcob and 17 guests