looking for help with 8061 code

Disassembly, Programming, Coding, Assembly, Binary information and all hacking discussions belong here.

looking for help with 8061 code

Unread postby jeeptech77 » Thu Apr 19, 2018 10:09 am

Hello can anyone help me find the tom lawrance 8061 dissembler
and direct me to information on using it correctly.

my second thing i need to find and correctly learn how to operate is PCMX

i am working with eec4 la3 bin
i have tried the sad dissembler and have been told it does not work with la3
i have also tried the tuner cats dissembler and have yet to get it to work it is unknown if it will work with la3
thanks for any guidance
Jason Davis
User avatar
jeeptech77
General Poster
 
Posts: 16
Joined: Sat Jun 24, 2017 12:26 pm
Name: jack
Vehicle Information: 1988 ford thunderbird turbo coupe la3 ecu quarterhorse and binary editor

Re: looking for help with 8061 code

Unread postby jsa » Thu Apr 19, 2018 3:31 pm

Hello Jason,

Post up your LA3 bin.

It is Bill Lawrence not Tom.
I can send you the BL disassembler.

SAD is now up to V3.06, which version did you try?
Have you tried SAD806X V1.2?

Yes CATS seems useless for anything other than GUFB.
Cheers
John
jsa
Power Poster
 
Posts: 420
Joined: Thu Jan 16, 2014 1:44 am
Location: In the shed or On the Computer, 'straya
Name: John
Vehicle Information: Escort RS Cosworth
EEC-IV GHAJ0 ANTI or COSY

Re: looking for help with 8061 code

Unread postby decipha » Thu Apr 19, 2018 3:56 pm

last i knew the bill lawrence disassembler wasn't functional and required some users input before it would function correctly, i know derek fenwick sailorbob and michael patton mpatton made updates to it over the years, no idea where its at now or what its up to, I use SAD as i prefer the listing

anywho, the disassembly write up on the homepage will give you all the specifics
User avatar
decipha
Tooner
 
Posts: 15787
Joined: Mon Jul 15, 2013 5:29 pm
Location: New Orleans, LA
Name: Michael Ponthieux
Vehicle Information: Supercoupin' x10
90 (4x 5spds) - Dante, Ruby, Daja, Ava
91 4r70w - Skarlett
92 (2x) 5spd & auto - Bianqa, Andrea
93 auto - Danika
94 5spd Rionda
95 auto Aisha
Vehicle 2 Information: Others:
00 Lincoln LS - Luanda
98 Camaro SS - Bounquisha
02 Harley F-150 - Sasasha
03 Marauder - DyShyKy
00 Explorer 5L - Bernyce

Re: looking for help with 8061 code

Unread postby jeeptech77 » Fri Apr 20, 2018 6:07 pm

jsa it was my mistake typing tom instead of bill i had it wrote down .
if you could send it my way i would really appreciate it .
as far as the sad version i used i got it off the write up decipha has here i have since deleted it as i was told it will not work .
i could see in the header that it loaded the bin but that's all it would do i am open to suggestions
thanks jason
You do not have the required permissions to view the files attached to this post.
User avatar
jeeptech77
General Poster
 
Posts: 16
Joined: Sat Jun 24, 2017 12:26 pm
Name: jack
Vehicle Information: 1988 ford thunderbird turbo coupe la3 ecu quarterhorse and binary editor

Re: looking for help with 8061 code

Unread postby ranga83 » Fri Apr 20, 2018 8:43 pm

LA3 (2)_lst.txt
just had a look, SAD looks like it will work. attached is the initial output file
You do not have the required permissions to view the files attached to this post.
ranga83
Power Poster
 
Posts: 241
Joined: Sat May 24, 2014 10:40 pm
Location: melbourne, victoria, australia
Name: kendall
Vehicle Information: 1996 EF Falcon 4.0 inline 6, 4TAD ecu, tunerpro, and moates q/h

Re: looking for help with 8061 code

Unread postby jeeptech77 » Tue Apr 24, 2018 7:48 am

ranga83 thank you ! i found the link to sad downloaded it and i can see it load the bin but what it dissembles is little compared to what u posted
https://github.com/tvrfan/EEC-IV-disassembler
do you have any pointers as to what i may be doing wrong ?
User avatar
jeeptech77
General Poster
 
Posts: 16
Joined: Sat Jun 24, 2017 12:26 pm
Name: jack
Vehicle Information: 1988 ford thunderbird turbo coupe la3 ecu quarterhorse and binary editor

Re: looking for help with 8061 code

Unread postby motorhead1991 » Tue Apr 24, 2018 8:14 am

SAD only works one way (yes, I'm the same Motorhead from EECTuning). Post up the output so we can compare I the two.
motorhead1991
Power Poster
 
Posts: 149
Joined: Mon Apr 03, 2017 6:46 pm
Name: Anthony Cox
Vehicle Information: 1990 Ford Ranger FLH2 conversion. Ford forged/dished pistons, Total Seal file-fit rings, Clevite rod and main bearings, Clevite cam bearings, IHI turbo, Siemens Deka 60lb/hr injectors, Ford slot MAF in custom 3" housing. Moates Quarterhorse with Binary Editor, using the PAAD6 database.
Vehicle 2 Information: Stock 1990 Ranger. ICM relocation

Re: looking for help with 8061 code

Unread postby jsa » Wed Apr 25, 2018 5:31 am

Here is the BL disassembler and help file.

It is harder to use than SAD806x or SAD.
You do not have the required permissions to view the files attached to this post.
Cheers
John
jsa
Power Poster
 
Posts: 420
Joined: Thu Jan 16, 2014 1:44 am
Location: In the shed or On the Computer, 'straya
Name: John
Vehicle Information: Escort RS Cosworth
EEC-IV GHAJ0 ANTI or COSY

Re: looking for help with 8061 code

Unread postby jsa » Wed Apr 25, 2018 5:51 am

Cheers
John
jsa
Power Poster
 
Posts: 420
Joined: Thu Jan 16, 2014 1:44 am
Location: In the shed or On the Computer, 'straya
Name: John
Vehicle Information: Escort RS Cosworth
EEC-IV GHAJ0 ANTI or COSY


Return to Programming & Coding

Who is online

Users browsing this forum: No registered users and 1 guest

cron