Stock slot MAF in a 4 inch tube
-
- Posts: 468
- Joined: 2021 Mar 21, 15:17
- Location: Colorado Springs, CO
- Vehicle Information: 95 Mustang GT, CBAZA Quarterhorse
331, 190 11R heads, Edelbrock Victor 50 manifold, F303, T5, 76mm Turbo, 91 octane, Returnless dual pump 03 cobra tank, Behind bars rails, 80# siemens injectors
wbo2_030MtxL
57 F100, RZASA, 04 Crown Vic ecu and harness, 302, GT40 heads, 4r70w, 80# deka5 shorties, Holley carb style throttle body, Speedmaster high rise intake manifold
Stock slot MAF in a 4 inch tube
Any issues with running a stock slot MAF from an 05-09 mustang (or other ford) in a 4 inch tube? I want to make sure ill have enough resolution. I'll be running a draw through setup. Are they all the same calibration across Ford's? Im gonna grab one from a junk yard car. What years did they go to frequency based mafs? 11+?
-
- Posts: 468
- Joined: 2021 Mar 21, 15:17
- Location: Colorado Springs, CO
- Vehicle Information: 95 Mustang GT, CBAZA Quarterhorse
331, 190 11R heads, Edelbrock Victor 50 manifold, F303, T5, 76mm Turbo, 91 octane, Returnless dual pump 03 cobra tank, Behind bars rails, 80# siemens injectors
wbo2_030MtxL
57 F100, RZASA, 04 Crown Vic ecu and harness, 302, GT40 heads, 4r70w, 80# deka5 shorties, Holley carb style throttle body, Speedmaster high rise intake manifold
Re: Stock slot MAF in a 4 inch tube
I just found the transfer for a 4 inch tube. Just need to know if they are all the same across 05-09 Fords. Thanks.
-
- Posts: 5094
- Joined: 2021 Feb 15, 12:23
- Location: Metairie, LA
- Vehicle Information: Work Truck
'19 F-150 3.3L
Re: Stock slot MAF in a 4 inch tube
yeah should all be the same, similar or close 'nough
Yeah 11+ mafs are frequency
later frequency mafs around 2015 or so changed the iat but not a big deal
its on the homepage. http://www.efidynotuning.com/maf101.htm
4" pipe is perfectly fine I've ran up to 5.5" pipe before no probs.
Yeah 11+ mafs are frequency
later frequency mafs around 2015 or so changed the iat but not a big deal
its on the homepage. http://www.efidynotuning.com/maf101.htm
4" pipe is perfectly fine I've ran up to 5.5" pipe before no probs.