EFIDynoTuning Forum

Thanks to wwhite I am adding some parameters to A1C as needed. Setting the Stoich AFR Scalar to 10:1 helped my e85 tune nicely. Please add to your next revision.

added will be in next update

Thanks for adding the trans stuff. There appears to be an error with FN1355 on the latest XDF. I believe the correct address is A92E but is set at B5DA in the xdf. It wiped fn32s when I set FN1355 to zero so that's how I found it.

correct i fixed it. thanks

FN23T is at B8D6

thanks

when time permits im going to go through all the auto trans stuff and verify

ok thanks, It looks pretty good now but fn23T was just missing

it was labelled wrong on mine.