Incorporating Mechanical Idle Control
Posted: 2023 May 30, 13:04
Just checking to see if I'm setting this up correctly. FN800 is labeled FN8000 in this calibration and I don't know what it means by remove the 10% clip and or reduce 100% values. May or may not be on this table or am I missing something.
FN1862 - If I divide the entire table by 6 it does not result in the 0.172 value at the top warm ECT cells
FN1862 - If I divide the entire table by 6 it does not result in the 0.172 value at the top warm ECT cells