What is Everyone using for Chips Now?
-
- Posts: 3
- Joined: 2022 Mar 17, 15:12
- Location: Cincy, OH
- Vehicle Information: 93 LX coupe 2.5L turbo, 5 spd
93 LX coupe, coyote turbo, 6R80
Re: What is Everyone using for Chips Now?
I have one of those TI chips. Man they are stupid expensive.
034V, where can you get that burner?
034V, where can you get that burner?
-
- Posts: 91
- Joined: 2021 Feb 22, 09:00
- Location: Dallas TX
- Vehicle Information: 1996 Lincoln Mark VIII LSC - Custom Turbocharged
1989 Lincoln Mark VII LSC - Custom Turbocharged --- SOLD
2013 Ford F150 FX2 - 3.5L Ecoboost
2019 Explorer Sport - 3.5L Ecoboost
Re: What is Everyone using for Chips Now?
The Burn2/FE/FA was a Moates setup. I've seen some copies of it, but not sure if you can find the adapter for the J3 anymore.
The TI Performance chips, I always order their burner with them. Like $230 for both shipped from the Aussie world.
Their burner works with TunerPro RT and has a unique bank assignment feature, but will not program anything but the TI Performance chip due to the ribbon cable. In other words, it wont burn via the card edge connector.
-
- Posts: 91
- Joined: 2021 Feb 22, 09:00
- Location: Dallas TX
- Vehicle Information: 1996 Lincoln Mark VIII LSC - Custom Turbocharged
1989 Lincoln Mark VII LSC - Custom Turbocharged --- SOLD
2013 Ford F150 FX2 - 3.5L Ecoboost
2019 Explorer Sport - 3.5L Ecoboost
Re: What is Everyone using for Chips Now?
Good device. Just some ECU's have slight capacitor interference but it's easy to manipulate around.
Reminder.. all 56k MUST be a 256k Binary
-
- Posts: 468
- Joined: 2021 Mar 21, 15:17
- Location: Colorado Springs, CO
- Vehicle Information: 95 Mustang GT, CBAZA Quarterhorse
331, 190 11R heads, Edelbrock Victor 50 manifold, F303, T5, 76mm Turbo, 91 octane, Returnless dual pump 03 cobra tank, Behind bars rails, 80# siemens injectors
wbo2_030MtxL
57 F100, RZASA, 04 Crown Vic ecu and harness, 302, GT40 heads, 4r70w, 80# deka5 shorties, Holley carb style throttle body, Speedmaster high rise intake manifold
Re: What is Everyone using for Chips Now?
How does one convert a 56k bin to 256k?
-
- Posts: 321
- Joined: 2021 Feb 16, 15:53
- Location: Victoria, BC, Canada
- Vehicle Information: 1994 Flarside, XLT, 351w E4OD
SD48b, Quarter Horse, Burn2
Re: What is Everyone using for Chips Now?
-
- Posts: 91
- Joined: 2021 Feb 22, 09:00
- Location: Dallas TX
- Vehicle Information: 1996 Lincoln Mark VIII LSC - Custom Turbocharged
1989 Lincoln Mark VII LSC - Custom Turbocharged --- SOLD
2013 Ford F150 FX2 - 3.5L Ecoboost
2019 Explorer Sport - 3.5L Ecoboost
Re: What is Everyone using for Chips Now?
57344 (56k) byte starting at 22000, which is bank 8 in a 256k. That is where the tuning will need to reside. Bin Size in HEX 40000..
-
- Posts: 321
- Joined: 2021 Feb 16, 15:53
- Location: Victoria, BC, Canada
- Vehicle Information: 1994 Flarside, XLT, 351w E4OD
SD48b, Quarter Horse, Burn2
Re: What is Everyone using for Chips Now?
Received my TIPerformance order today…
Came with a hat that fits, candy that I ate most of, a pen with ink, and a couple of J3 adapters that I think have connections for a switch to change tunes.
Now I just need to find some time.
Came with a hat that fits, candy that I ate most of, a pen with ink, and a couple of J3 adapters that I think have connections for a switch to change tunes.
Now I just need to find some time.
-
- Posts: 321
- Joined: 2021 Feb 16, 15:53
- Location: Victoria, BC, Canada
- Vehicle Information: 1994 Flarside, XLT, 351w E4OD
SD48b, Quarter Horse, Burn2
Re: What is Everyone using for Chips Now?
Supper happy!!!
-
- Posts: 91
- Joined: 2021 Jun 03, 14:46
- Location: New Orleans
- Vehicle Information: 1994 F150 Lightning
WAY1 / SMD-221
408w / AFR heads / Ported GT40
Novi 2000 intercooled S/C
wbo2_aem_uego