Older A9L2 Dashpot funcs and BE, TunerPro
Posted: 2022 Jul 11, 11:00
I posted about what I believe is a non-functioning dashpot algorithm in my current (older) A9L2 based tune on https://eectuning.org/forums/viewtopic. ... 3f405815a8 and forgot this forum probably gets more traffic these days.
I have disabled and enabled the dashpot functions by zeroing them out and the datalogs show that it's not adhering to the changes I'm making at all. The base tune, based on the dates I can see in my revision history, appears to be mid-2016 timeframe. I may have screwed things up by mixing Binary Editor with Tunerpro RT, but am hoping someone can confirm what I may or may not be doing correctly. The reason for using BE is that my QH is not installed, but a TwEECer RT is - unfortunately, many of the adjustments I've made were made via BE as well. Since so much patching has been done on the A9L2 base tune, could that account for why making changes to the dashpot functions doesn't work when made from BE, even with this older circa-2016 base tune?
Tune and log attached. The main indicators are that the ISC DC moves very slowly and is basically not reacting to idle fluctuations at all and the dashpot doesn't track the RPM either. Thanks.
I have disabled and enabled the dashpot functions by zeroing them out and the datalogs show that it's not adhering to the changes I'm making at all. The base tune, based on the dates I can see in my revision history, appears to be mid-2016 timeframe. I may have screwed things up by mixing Binary Editor with Tunerpro RT, but am hoping someone can confirm what I may or may not be doing correctly. The reason for using BE is that my QH is not installed, but a TwEECer RT is - unfortunately, many of the adjustments I've made were made via BE as well. Since so much patching has been done on the A9L2 base tune, could that account for why making changes to the dashpot functions doesn't work when made from BE, even with this older circa-2016 base tune?
Tune and log attached. The main indicators are that the ISC DC moves very slowly and is basically not reacting to idle fluctuations at all and the dashpot doesn't track the RPM either. Thanks.