Page 1 of 3
Purpose of THBP2 scalar VS FN513
Posted: 2022 May 26, 16:30
by DOHCTOR_32V
Hi, what is the purpose of having both FN513 and the THBP2 scalar, other than FN513 being capable of RPM scaling? Does either take precedence over the other if set to a lower value?
Is it preferred to set both the same or in some offset fasion?
Re: Purpose of THBP2 scalar VS FN513
Posted: 2022 May 26, 17:16
by decipha
there is none
fn513 is the updated code for thbp2
that scalar might just be a place holder there
fn513 is what you want
Re: Purpose of THBP2 scalar VS FN513
Posted: 2022 May 26, 17:50
by DOHCTOR_32V
Perfect! Thanks
Re: Purpose of THBP2 scalar VS FN513
Posted: 2022 May 27, 09:01
by sailorbob
THBP2 does not exist in the CBAZ* strategies.
Re: Purpose of THBP2 scalar VS FN513
Posted: 2022 May 27, 11:28
by DOHCTOR_32V
Thanks Sailorbob. The knowledge you all have about these things is a huge help. It's a little confusing when a parameter is left hanging out there like that particular one. I found no mention of THBP2 in the CBAZA document, yet here the scalar is, LOL
Re: Purpose of THBP2 scalar VS FN513
Posted: 2022 May 27, 12:41
by decipha
if u have the cbaza doc please do send it to me that would be a big help
Re: Purpose of THBP2 scalar VS FN513
Posted: 2022 May 27, 15:26
by DOHCTOR_32V
PM sent
Re: Purpose of THBP2 scalar VS FN513
Posted: 2022 May 27, 17:02
by jsa
Me too, please. PM sent.
Re: Purpose of THBP2 scalar VS FN513
Posted: 2022 May 28, 01:46
by dleach1407
can you send that to me too please? I've never been able to find it.
Re: Purpose of THBP2 scalar VS FN513
Posted: 2022 May 28, 04:18
by sailorbob
If you have a CBAZ* definition with THBP2 in it then the definition is wrong. If you post the address of the parameter I'll see what it actually is (assuming I have figured it out in my disassembly!).