Pcv options
-
- Posts: 468
- Joined: 2021 Mar 21, 15:17
- Location: Colorado Springs, CO
- Vehicle Information: 95 Mustang GT, CBAZA Quarterhorse
331, 190 11R heads, Edelbrock Victor 50 manifold, F303, T5, 76mm Turbo, 91 octane, Returnless dual pump 03 cobra tank, Behind bars rails, 80# siemens injectors
wbo2_030MtxL
57 F100, RZASA, 04 Crown Vic ecu and harness, 302, GT40 heads, 4r70w, 80# deka5 shorties, Holley carb style throttle body, Speedmaster high rise intake manifold
Pcv options
Now that I've essentially got my junk figured out, i want to look at adding a PCV in the valve cover since my intake doesn't have provisions for one. I know about using 2 check valves, i know you recommend the turbo coupe pcv. Is there another option for a pcv? I really dislike the double vacuum ports on the stock motorcraft unit. I hate having to use vacuum plugs that dry rot, leak and fail over time. Would say a pcv from a 5.4 f150 be acceptable? My car only pulls 10 inches of vacuum because of my altitude and my cam so i have to be careful, i can't afford to lose much more so that also needs to be taken into account.
-
- Posts: 5094
- Joined: 2021 Feb 15, 12:23
- Location: Metairie, LA
- Vehicle Information: Work Truck
'19 F-150 3.3L
Re: Pcv options
you can use any when you put a check valve on it
-
- Posts: 468
- Joined: 2021 Mar 21, 15:17
- Location: Colorado Springs, CO
- Vehicle Information: 95 Mustang GT, CBAZA Quarterhorse
331, 190 11R heads, Edelbrock Victor 50 manifold, F303, T5, 76mm Turbo, 91 octane, Returnless dual pump 03 cobra tank, Behind bars rails, 80# siemens injectors
wbo2_030MtxL
57 F100, RZASA, 04 Crown Vic ecu and harness, 302, GT40 heads, 4r70w, 80# deka5 shorties, Holley carb style throttle body, Speedmaster high rise intake manifold
Re: Pcv options
Are there any that flow less or more? I dont want to install it an lose 3 inches of vacuum.
-
- Posts: 5094
- Joined: 2021 Feb 15, 12:23
- Location: Metairie, LA
- Vehicle Information: Work Truck
'19 F-150 3.3L
Re: Pcv options
if you loose vac with a pcv setup then you have a leak