02 v6 Mustang to 5.4 4v twin turbo
-
- Posts: 69
- Joined: 2021 Oct 18, 18:07
- Location: Long Island NY
- Vehicle Information: 02 Mustang v6. Swapped to 5.4L 4v with Twin turbo. Navi stock heads, H connecting rods. Piston is .03 oversized. Using MDE3 ECM
02 v6 Mustang to 5.4 4v twin turbo
Hello All, I'm new to this forum. I'm here to get my monster mustang properly tuned and while I'm here, I thought to share with the crew my build.
The stang, was born 2002 v6 automatic. It went under the operating table and now has a heart of 5.4L 4v, twin turbos in the front. In the rear it is hunkered down on Ford 9' rear.
*****Items Needed for the swap****
-UPR Tubular K-member
-99-01 Cobra Intake manifold
-Reicard Racing 4.6-5.4 4v adapter plates
-02 GT ECM
-02 GT Engine & ECM harness
-80lb Siemen Deka Injectors
-5.4L (0.030 over bored short-block from 2008 E350)
-High Volume oil pump
-PCE H beam connecting rods(from Ebay)
-Factory pistons sized for the .030 bore
Pics coming soon
The stang, was born 2002 v6 automatic. It went under the operating table and now has a heart of 5.4L 4v, twin turbos in the front. In the rear it is hunkered down on Ford 9' rear.
*****Items Needed for the swap****
-UPR Tubular K-member
-99-01 Cobra Intake manifold
-Reicard Racing 4.6-5.4 4v adapter plates
-02 GT ECM
-02 GT Engine & ECM harness
-80lb Siemen Deka Injectors
-5.4L (0.030 over bored short-block from 2008 E350)
-High Volume oil pump
-PCE H beam connecting rods(from Ebay)
-Factory pistons sized for the .030 bore
Pics coming soon
-
- Posts: 151
- Joined: 2021 Mar 22, 15:58
- Location: Newington CT
- Vehicle Information: 1986 Mustang GT, Stock block, TFS 170 Heads , N41 cam, ported cobra intake, nitrous, T5 , 3.73s
Re: 02 v6 Mustang to 5.4 4v twin turbo
This is gonna be awesome! Is there a turbo kit you'll be using or fab your own piping?
-
- Posts: 69
- Joined: 2021 Oct 18, 18:07
- Location: Long Island NY
- Vehicle Information: 02 Mustang v6. Swapped to 5.4L 4v with Twin turbo. Navi stock heads, H connecting rods. Piston is .03 oversized. Using MDE3 ECM
Re: 02 v6 Mustang to 5.4 4v twin turbo
I used the following turbo manifold kit from https://cgfabrication.com/collections/f ... bo-hotside. This kit allow you to keep all accessories. Best direct fit kit there is.
-
- Posts: 468
- Joined: 2021 Mar 21, 15:17
- Location: Colorado Springs, CO
- Vehicle Information: 95 Mustang GT, CBAZA Quarterhorse
331, 190 11R heads, Edelbrock Victor 50 manifold, F303, T5, 76mm Turbo, 91 octane, Returnless dual pump 03 cobra tank, Behind bars rails, 80# siemens injectors
wbo2_030MtxL
57 F100, RZASA, 04 Crown Vic ecu and harness, 302, GT40 heads, 4r70w, 80# deka5 shorties, Holley carb style throttle body, Speedmaster high rise intake manifold
Re: 02 v6 Mustang to 5.4 4v twin turbo
I love their kits but I hope you requested the hot side without oxygen sensor bungs in the manifolds. It's clear these fabricators don't understand tuning at all.
-
- Posts: 69
- Joined: 2021 Oct 18, 18:07
- Location: Long Island NY
- Vehicle Information: 02 Mustang v6. Swapped to 5.4L 4v with Twin turbo. Navi stock heads, H connecting rods. Piston is .03 oversized. Using MDE3 ECM
Re: 02 v6 Mustang to 5.4 4v twin turbo
@dleach1407, so the upstream O2 should not be on the manifold? Do I need to relocate my upstream o2 sensor further away from the manifold? maybe on the downpipe instead?
-
- Posts: 468
- Joined: 2021 Mar 21, 15:17
- Location: Colorado Springs, CO
- Vehicle Information: 95 Mustang GT, CBAZA Quarterhorse
331, 190 11R heads, Edelbrock Victor 50 manifold, F303, T5, 76mm Turbo, 91 octane, Returnless dual pump 03 cobra tank, Behind bars rails, 80# siemens injectors
wbo2_030MtxL
57 F100, RZASA, 04 Crown Vic ecu and harness, 302, GT40 heads, 4r70w, 80# deka5 shorties, Holley carb style throttle body, Speedmaster high rise intake manifold
Re: 02 v6 Mustang to 5.4 4v twin turbo
OP, Mine is about 6 inches from the turbo outlet. Unless you're using cats and want to validate they work, you can eliminate the downstream sensors.
-
- Posts: 69
- Joined: 2021 Oct 18, 18:07
- Location: Long Island NY
- Vehicle Information: 02 Mustang v6. Swapped to 5.4L 4v with Twin turbo. Navi stock heads, H connecting rods. Piston is .03 oversized. Using MDE3 ECM
Re: 02 v6 Mustang to 5.4 4v twin turbo
Ok, I will relocate my upstreams 02s to the downpipe
-
- Posts: 18
- Joined: 2021 Feb 17, 06:15
- Location: Melbourne, FL
- Vehicle Information: 2000 Mustang
Twin Turbo 4V
2004 EEC-V
FBGI0
Re: 02 v6 Mustang to 5.4 4v twin turbo
Look forward to pics. I swapped a 4.6 4V into a 2000 V6. Curious which stock pistons fit 0.030" over bore?
-
- Posts: 69
- Joined: 2021 Oct 18, 18:07
- Location: Long Island NY
- Vehicle Information: 02 Mustang v6. Swapped to 5.4L 4v with Twin turbo. Navi stock heads, H connecting rods. Piston is .03 oversized. Using MDE3 ECM
Re: 02 v6 Mustang to 5.4 4v twin turbo
All stock pistons are sized for the 0.030 block over bore.