Page 2 of 3
Re: convert 224K to 256K
Posted: 2021 Nov 07, 19:08
by therocks
I don't delete 65536, i don't put it
look at this
Re: convert 224K to 256K
Posted: 2021 Nov 08, 05:30
by therocks
you can confirm me that start adress for the bank in 256k files
bank 0 start adress 0x02000
bank 1 start adress 0x12000
bank 8 start adress 0x22000
bank 9 start adresss 0x32000
and bank order also 0-1-8-9?
thanks
Re: convert 224K to 256K
Posted: 2021 Nov 08, 07:33
by decipha
it was originally 1-8-0-9 thats how kess and pcmflash read
swappoed over to 256k 0-1-8-9
Re: convert 224K to 256K
Posted: 2021 Nov 09, 06:01
by therocks
thanks i will try i way you
Re: convert 224K to 256K
Posted: 2021 Nov 15, 11:34
by therocks
Is not working, dashboard without display and no communication with diagnostic
Re: convert 224K to 256K
Posted: 2021 Nov 15, 12:57
by decipha
I can't be of any help then unless you have a quarterhorse to read the ecu out.
Re: convert 224K to 256K
Posted: 2021 Nov 18, 06:10
by therocks
i will buy it .
quaterhorse read full? and sort file of 256KO?
Re: convert 224K to 256K
Posted: 2021 Nov 18, 13:00
by decipha
yep its in the getting started write up
Re: convert 224K to 256K
Posted: 2022 Jan 17, 08:42
by therocks
Hi,
i have receive the QH setup as describe in getting started.
read the pcm by 2 method on car and on table (i have homemade harness for check pcm without car)
here the 2 bin read, they are the same but no bank order (FF FA 27 FE,...)
if you see what cause this.
thanks
Re: convert 224K to 256K
Posted: 2022 Jan 17, 12:59
by decipha
both reads are the same so thats promising
Doesn't look like any american code I've ever seen.