hi there, putting together a 347 and trying to learn this tuning stuff, i picked up some E9SE B1B injectors (bosch P/N: 0280150756, believe they are
30#/hr@39psi ) and im having a difficult time finding the info for these, ie: high slope, low slope and break point etc. if anyone has the info, that would be great!
thanks
E9SE B1B Injector info
-
- Posts: 5099
- Joined: 2021 Feb 15, 12:23
- Location: Metairie, LA
- Vehicle Information: Work Truck
'19 F-150 3.3L
Re: E9SE B1B Injector info
E9 is 1989 those are the stock supercoupe injectors which were also used on the gmc syclone trucks.
The stock SC tune uses the same offset as the stock fox 19s with a high slope of 30 and low of 34 for fuel to be perfecty dialed in on a stock sc. However the stock cal data is wrong.
When I get to my laptop tomorrow I can post the data I use for them.
The stock SC tune uses the same offset as the stock fox 19s with a high slope of 30 and low of 34 for fuel to be perfecty dialed in on a stock sc. However the stock cal data is wrong.
When I get to my laptop tomorrow I can post the data I use for them.
-
- Posts: 3
- Joined: 2021 Apr 19, 20:25
- Location: Toronto
- Vehicle Information: 1986 Mustang GT, 5 speed, A9P converted, stock 302 with long tubes.
Re: E9SE B1B Injector info
oh very cool, that would be great! thanks so much
-
- Posts: 3
- Joined: 2021 Apr 19, 20:25
- Location: Toronto
- Vehicle Information: 1986 Mustang GT, 5 speed, A9P converted, stock 302 with long tubes.
Re: E9SE B1B Injector info
hey again, hope you had a nice weekend. just found out, 6/8 of my injectors are shot.. dont click when touched to a battery. wont be needing that info any longer, thanks i was looking at the Racetronix 01D030x, do you have any experience with them?
thanks
thanks