Please help...03 mach1 FBGI0 stock tune.
-
- Posts: 18
- Joined: 2022 Nov 25, 00:10
- Location: Prague
- Vehicle Information: 2003 Mach1, stock engine with Comp cams 106100
Please help...03 mach1 FBGI0 stock tune.
Hello guys. I have 03 mach1, need tune my pcm. Have anyone stock 03 mach1 binary converted to FBGI0 please? I dont have FBFG2 strategy for RYAK1 in tuner pro, ryak1 not properly displayed parameters with FBGI0.
-
- Posts: 164
- Joined: 2021 Feb 16, 10:09
- Location: Knoxville, TN
- Vehicle Information: 1986 Capri 306, Twisted Wedge heads, RPM II Intake, Anderson B3 cam, 80Lbs Siemens Injectors, MAC Longtube Headers, G-Force T5, Spec 6 Puck Clutch, Ford Racing Aluminum Driveshaft.
Re: Please help...03 mach1 FBGI0 stock tune.
If you find one let me know. But i used the 03/04 cobra bin thats posted at the top of this category. Its close enough to get the car running. Im completely new to the mod motor stuff and its not in the budget to pay for a premium membership and let Decipha remote tune so im learning as i go. Good luck with the search!
-
- Posts: 18
- Joined: 2022 Nov 25, 00:10
- Location: Prague
- Vehicle Information: 2003 Mach1, stock engine with Comp cams 106100
Re: Please help...03 mach1 FBGI0 stock tune.
I have relatively stock car, only need adjust some parameters, maybe FBFG2 strategy works on our cars, not actual but for some adjust could by done but FBFG2 can not find too...maybe somebody still have FBFG2 in laptop?bad86capri wrote: ↑2022 Nov 26, 17:13 If you find one let me know. But i used the 03/04 cobra bin thats posted at the top of this category. Its close enough to get the car running. Im completely new to the mod motor stuff and its not in the budget to pay for a premium membership and let Decipha remote tune so im learning as i go. Good luck with the search!
-
- Posts: 164
- Joined: 2021 Feb 16, 10:09
- Location: Knoxville, TN
- Vehicle Information: 1986 Capri 306, Twisted Wedge heads, RPM II Intake, Anderson B3 cam, 80Lbs Siemens Injectors, MAC Longtube Headers, G-Force T5, Spec 6 Puck Clutch, Ford Racing Aluminum Driveshaft.
Re: Please help...03 mach1 FBGI0 stock tune.
My car is stock with longtube headers, X-pipe and 01 cobra intake cams. right now ive put 10 miles on it without the QH and im only running on 1 factory o2. its running the greatest as one can imagine. lol. hopefully tomorrow after church ill have time to put the QH in and start it with the FBGIO/MGZT bin and start tuning.
-
- Posts: 18
- Joined: 2022 Nov 25, 00:10
- Location: Prague
- Vehicle Information: 2003 Mach1, stock engine with Comp cams 106100
Re: Please help...03 mach1 FBGI0 stock tune.
Same. Stock engine only comp cams, xpipe. Car run without problems with stock ecu.
-
- Posts: 18
- Joined: 2022 Nov 25, 00:10
- Location: Prague
- Vehicle Information: 2003 Mach1, stock engine with Comp cams 106100
Re: Please help...03 mach1 FBGI0 stock tune.
Only idle rpm and timing idle need adjust.
-
- Posts: 18
- Joined: 2022 Nov 25, 00:10
- Location: Prague
- Vehicle Information: 2003 Mach1, stock engine with Comp cams 106100
Re: Please help...03 mach1 FBGI0 stock tune.
Thanks sooo much to DECIPHA for mach bins