Needing to know the order of operations and modifiers for the dpfe egr system ford used
trying to setup a ms3x to mimic the stock system, but I realized I only know the absolute basics of the DPFE system and it is not a simple system lol.
SO egr is active during PT, is it always active during PT? is there any modifiers for ECT and IAT? Does it stop operating over a certain RPM or load in PT?
Is the DPFE used explicitly to verify funciton or is it used to more accurately increase spark advance with less chance of knock by quantifying the actual EGR flow?
What kind of advance do the PI 4.6's usually take with EGR over not? Is the fuel only modified through the EGO controls or is there a separate fuel table too?
Guessing that LTFT with EGR is stored, but is it stored with an EGR active flag or blended into the regular tables?
So many damn questions, but I needs the MPG
TIA.
dpfe EGR order of operations
-
- Posts: 98
- Joined: 2021 Mar 24, 10:32
- Location: springdale arkansas
- Vehicle Information: 98 mustang gt 5 spd
-
- Posts: 98
- Joined: 2021 Mar 24, 10:32
- Location: springdale arkansas
- Vehicle Information: 98 mustang gt 5 spd
Re: dpfe EGR order of operations
gee thanks
seeing as you know how the eec dpfe systems operates, mind giving me a cliffnotes?
Those arent small documents, as your well aware being the uploader.
seeing as you know how the eec dpfe systems operates, mind giving me a cliffnotes?
Those arent small documents, as your well aware being the uploader.
-
- Posts: 285
- Joined: 2021 Feb 16, 15:46
- Location: Australia
- Vehicle Information: 95 Escort RS Cosworth
2.0 YBP
CARD / QUIK / COSY / ANTI
GHAJ0
SMD-190 / SMD-490 EEC-IV
Binary Editor
ForDiag
Re: dpfe EGR order of operations
You are most welcome.
Cliffnotes say read the manual!
I read them long ago and often refer to them still. I don't recall the dpfe specifics. I suggest searching for dpfe in the document text to cut down the volume of reading.
Cliffnotes say read the manual!
I read them long ago and often refer to them still. I don't recall the dpfe specifics. I suggest searching for dpfe in the document text to cut down the volume of reading.