1993 F150 4x4 - Trans Tooning

A1C calibration can be modified and configured to operate all EFI-SD4x ECUs in 4 cylinder, 6 cylinder and 8 cylinder configurations.
efloth
Posts: 304
Joined: 2021 Feb 15, 22:12
Location: Sacramento CA
Vehicle Information: 1991 F150 4.9L J1X 80lb Injectors E85
1995 F150 5.8L MOB1

Re: 1993 F150 4x4 - Trans Tooning

Unread post by efloth »

Is it better to pull timing or add fuel when towing? I I'm thinking towing in first gear is going to be pretty light throttle once up to speed so it'll be running stoich. Should I just add some digits to the bdl table?
decipha
Posts: 5094
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: 1993 F150 4x4 - Trans Tooning

Unread post by decipha »

if its pinging then its got too much timing for that condition.

Yank the timing down at that rpm and map.
efloth
Posts: 304
Joined: 2021 Feb 15, 22:12
Location: Sacramento CA
Vehicle Information: 1991 F150 4.9L J1X 80lb Injectors E85
1995 F150 5.8L MOB1

Re: 1993 F150 4x4 - Trans Tooning

Unread post by efloth »

Getting ready to move to my f3v2 chip to free up the QH. One last issue is the trans slams when doing manual 1st to manual 2nd shift but only when throttle is closed. Can that be fixed in software?
Post Reply