Looking for EFI-SD42 board images and BIN file
-
- Posts: 321
- Joined: 2021 Feb 16, 15:53
- Location: Victoria, BC, Canada
- Vehicle Information: 1994 Flarside, XLT, 351w E4OD
SD48b, Quarter Horse, Burn2
Looking for EFI-SD42 board images and BIN file
Hi,
Looking for EFI-SD42 circuit board images front and back if possible please.
Also, looking for binaries for JOY0 or ZAK0 or similar for EFI-SD42.
I believe these boards are for 5.0l manuals, with power steering pressure switch input.
Why?
I'm doing a fare amount of hacking on SD boards and this is just another thing to add.
I am reverse engineering so I can fully understand that I/O pin on the CPU, as well as follow the traces on the circuit board to follow what EEC-IV pin to use.
I will soon have 3-4 extra input/outputs that I can use for whatever I want.
Example: trip minder output, A/F input, maybe VGT.
Looking for EFI-SD42 circuit board images front and back if possible please.
Also, looking for binaries for JOY0 or ZAK0 or similar for EFI-SD42.
I believe these boards are for 5.0l manuals, with power steering pressure switch input.
Why?
I'm doing a fare amount of hacking on SD boards and this is just another thing to add.
I am reverse engineering so I can fully understand that I/O pin on the CPU, as well as follow the traces on the circuit board to follow what EEC-IV pin to use.
I will soon have 3-4 extra input/outputs that I can use for whatever I want.
Example: trip minder output, A/F input, maybe VGT.
-
- Posts: 66
- Joined: 2022 Oct 20, 00:16
- Location: Northern CA
- Vehicle Information: 1995 Ford F150 XLT 4x4 5L manual M5OD-R2 (might upgrade to ZF5 later), 3.55 diffs, 30" tires (31.7" planned), e-fan (separate temp sensor, Flexalite 295)
EFI-SD42F / JOY0
Tuning a 347 w/ RV cam, 1.7 rollers, 60lb deka injectors, but otherwise stock (in particular the stock 30-45lb FPR). Emissions vehicle.
WB_AEM-X
Re: Looking for EFI-SD42 board images and BIN file
I have a SD42/JOY0 if you're still interested (looks like it's been a year)
-
- Posts: 321
- Joined: 2021 Feb 16, 15:53
- Location: Victoria, BC, Canada
- Vehicle Information: 1994 Flarside, XLT, 351w E4OD
SD48b, Quarter Horse, Burn2
Re: Looking for EFI-SD42 board images and BIN file
Ah, yes, had to read my own post to remember why.
I’m interested in the power steering switch circuitry, and the code with it.
So, yes, still interested.
I’m interested in the power steering switch circuitry, and the code with it.
So, yes, still interested.
-
- Posts: 66
- Joined: 2022 Oct 20, 00:16
- Location: Northern CA
- Vehicle Information: 1995 Ford F150 XLT 4x4 5L manual M5OD-R2 (might upgrade to ZF5 later), 3.55 diffs, 30" tires (31.7" planned), e-fan (separate temp sensor, Flexalite 295)
EFI-SD42F / JOY0
Tuning a 347 w/ RV cam, 1.7 rollers, 60lb deka injectors, but otherwise stock (in particular the stock 30-45lb FPR). Emissions vehicle.
WB_AEM-X
Re: Looking for EFI-SD42 board images and BIN file
Attached the bin.
My only photos right now are angled shots of the caps that I'll be replacing when I take the ECU out to lock in the tune. I've attached them in case they happen to be helpful, but I'll take proper top/bottom photos when I have the module out next.
My only photos right now are angled shots of the caps that I'll be replacing when I take the ECU out to lock in the tune. I've attached them in case they happen to be helpful, but I'll take proper top/bottom photos when I have the module out next.
- Attachments
-
- EFI-SD42F_JOY0.bin
- (56 KiB) Downloaded 186 times
-
- Posts: 66
- Joined: 2022 Oct 20, 00:16
- Location: Northern CA
- Vehicle Information: 1995 Ford F150 XLT 4x4 5L manual M5OD-R2 (might upgrade to ZF5 later), 3.55 diffs, 30" tires (31.7" planned), e-fan (separate temp sensor, Flexalite 295)
EFI-SD42F / JOY0
Tuning a 347 w/ RV cam, 1.7 rollers, 60lb deka injectors, but otherwise stock (in particular the stock 30-45lb FPR). Emissions vehicle.
WB_AEM-X
Re: Looking for EFI-SD42 board images and BIN file
So I just discovered that none of the '95 F150s were actually wired for a power steering pressure switch (according to the EVTM). I guess my 5L/M5OD config simply came with the legacy ECU.
-
- Posts: 5098
- Joined: 2021 Feb 15, 12:23
- Location: Metairie, LA
- Vehicle Information: Work Truck
'19 F-150 3.3L
Re: Looking for EFI-SD42 board images and BIN file
attached ZAK0
I found it laying around and didn't read it out directly so I don't know if its correct or accurate or unmodified but should be stock.
I found it laying around and didn't read it out directly so I don't know if its correct or accurate or unmodified but should be stock.
- Attachments
-
- ZAK0.bin
- (56 KiB) Downloaded 143 times
-
- Posts: 321
- Joined: 2021 Feb 16, 15:53
- Location: Victoria, BC, Canada
- Vehicle Information: 1994 Flarside, XLT, 351w E4OD
SD48b, Quarter Horse, Burn2
Re: Looking for EFI-SD42 board images and BIN file
Cool. Thank you
-
- Posts: 321
- Joined: 2021 Feb 16, 15:53
- Location: Victoria, BC, Canada
- Vehicle Information: 1994 Flarside, XLT, 351w E4OD
SD48b, Quarter Horse, Burn2
Re: Looking for EFI-SD42 board images and BIN file
So, what I have found with both JOY0 and ZAK0, is that the PSPS is set to 0.
I have yet to find a stock bin where it is set to 1.
Maybe I have the wrong scalar.
I have yet to find a stock bin where it is set to 1.
Maybe I have the wrong scalar.
Code: Select all
d1f8: 01 byte 1 KIHP
d1f9: 00 byte 0
d1fa: 00 byte 0 PSPS
-
- Posts: 28
- Joined: 2022 Jul 08, 04:54
- Location: South Australia
- Vehicle Information: 1995 ford falcon ute 5.0 windsor efi
Re: Looking for EFI-SD42 board images and BIN file
In some of the Aussie SD ones I am working on have "hardware present set to 0" and it appears to be compared to 1 as being not present.
I will post a example when I have computer on.
I might also be looking at it incorrectly....
I will post a example when I have computer on.
I might also be looking at it incorrectly....