With my RZASA xdf having over 3,400 parameters its becoming cumbersome to navigate in tree view so figured I'd need to start utilizing the levels to make it easier on myself. This is what I came up with.
LEVELS
10- console pids, scaling - hidden patches, unused normally unchanged stuff
9 - obd2, custom code patches, hardware limits
8 - closed loop algorithms, base tune stuff thats hidden normally
7 - hardware config, fail safe, additional limiters, backflow, ipsibr related
6 - mbt, sarchg, scaling used commonly, etc, vtc, tseif - next level intermediate stuff but not normally needed
ABOVE 5 IS GETTING AWAY FROM TUNING AND IN TO CONFIGURATION
ADVANCED USERS ALL THEY NEED
5 - spark retard, knock sensor, stoich,
4 - perload, fn1036, imrc, startup enrich
3 - dashpot, dfso, isc mul
2 - trans shifting, tcc
1 - maf, bdl, base fuel, rev limiter, axle, driver demand
Posting here for myself to have a reference. Won't be in the other xdf's til 2025 or so.
TunerPro LEVELs - RZASA 1st
-
- Posts: 88
- Joined: 2021 Apr 15, 10:56
- Location: Spring Texas
- Vehicle Information: 00 F150 4.6L Extended cab
CVAF1
4R70 3.08
Re: TunerPro LEVELs - RZASA 1st
Good work
-
- Posts: 165
- Joined: 2021 Feb 16, 10:09
- Location: Knoxville, TN
- Vehicle Information: 1986 Capri 306, Twisted Wedge heads, RPM II Intake, Anderson B3 cam, 80Lbs Siemens Injectors, MAC Longtube Headers, G-Force T5, Spec 6 Puck Clutch, Ford Racing Aluminum Driveshaft.
Re: TunerPro LEVELs - RZASA 1st
How hard is it to re-organize the tree view?
-
- Posts: 5099
- Joined: 2021 Feb 15, 12:23
- Location: Metairie, LA
- Vehicle Information: Work Truck
'19 F-150 3.3L
Re: TunerPro LEVELs - RZASA 1st
if you do two parameters a minute, 4 hours a day 3x a week itll take about 2 1/2 weeks
-
- Posts: 152
- Joined: 2023 Feb 18, 22:25
- Location: Hazel Green Alabama USA
- Vehicle Information: 1997 Mountaineer 5.0 that originally had a wasted spark ignition system. I'm converting to coil-near-plug. I will use a 4.6 Luxury Sedan PCM & modified powertrain harness. It will be reprogrammed to operate the Windsor 5.0.
Re: TunerPro LEVELs - RZASA 1st
I assume this does not change the bin order?