SUB2 stock bin - '95 4.9L E4OD
-
- Posts: 113
- Joined: 2021 Nov 08, 22:24
- Location: North Central IL
- Vehicle Information: 1994 F-350 CCLB 7.5/ZF/4wd
1995 F-250 RCLB 4.9/T18/4wd
2000 Excursion 6.8/4R100/4wd
2001 Ranger RCSB 2.3/M5OD/2wd - turbocharged
2007 Town Car 4.6/4R75E
2011 Ranger SCSB 2.3/M5OD/2wd
wbo2_aem_uego
Re: SUB2 stock bin - '95 4.9L E4OD
Thanks a million guys. Im a little busy currently but will give this a shot when I get a chance.
Now that I'm thinking of it, SUB2 is for an E4OD trans, I converted her to a T18 4-spd manual. What all needs to change? Just the trans type scalar? Or should I go make all the drive vs neutral versions of the various tables identical too?
Now that I'm thinking of it, SUB2 is for an E4OD trans, I converted her to a T18 4-spd manual. What all needs to change? Just the trans type scalar? Or should I go make all the drive vs neutral versions of the various tables identical too?
-
- Posts: 304
- Joined: 2021 Feb 15, 22:12
- Location: Sacramento CA
- Vehicle Information: 1991 F150 4.9L J1X 80lb Injectors E85
1995 F150 5.8L MOB1
Re: SUB2 stock bin - '95 4.9L E4OD
yeah just set Tstrat from 4 to 0
-
- Posts: 113
- Joined: 2021 Nov 08, 22:24
- Location: North Central IL
- Vehicle Information: 1994 F-350 CCLB 7.5/ZF/4wd
1995 F-250 RCLB 4.9/T18/4wd
2000 Excursion 6.8/4R100/4wd
2001 Ranger RCSB 2.3/M5OD/2wd - turbocharged
2007 Town Car 4.6/4R75E
2011 Ranger SCSB 2.3/M5OD/2wd
wbo2_aem_uego
Re: SUB2 stock bin - '95 4.9L E4OD
Finally started working with this a bit. I'm getting an error when trying to apply the ext VE table patch - it says "Patch aborted. Base value does not match."
-
- Posts: 304
- Joined: 2021 Feb 15, 22:12
- Location: Sacramento CA
- Vehicle Information: 1991 F150 4.9L J1X 80lb Injectors E85
1995 F150 5.8L MOB1
Re: SUB2 stock bin - '95 4.9L E4OD
Post the bin you're working with and I'll check it out
-
- Posts: 304
- Joined: 2021 Feb 15, 22:12
- Location: Sacramento CA
- Vehicle Information: 1991 F150 4.9L J1X 80lb Injectors E85
1995 F150 5.8L MOB1
Re: SUB2 stock bin - '95 4.9L E4OD
On second thought make sure you apply the ve patch first
-
- Posts: 113
- Joined: 2021 Nov 08, 22:24
- Location: North Central IL
- Vehicle Information: 1994 F-350 CCLB 7.5/ZF/4wd
1995 F-250 RCLB 4.9/T18/4wd
2000 Excursion 6.8/4R100/4wd
2001 Ranger RCSB 2.3/M5OD/2wd - turbocharged
2007 Town Car 4.6/4R75E
2011 Ranger SCSB 2.3/M5OD/2wd
wbo2_aem_uego
Re: SUB2 stock bin - '95 4.9L E4OD
Here's the bin I'm working on. So far I made changes to stock SUB2 bin to 1) change to a manual trans, and 2) change injector parameters for gen 1 coyote 34 lb/hr injectors.
It won't me apply the extended VE table patch - I'm getting an dialog box with an error message that says "Patch aborted. Base data does not match." when I click the "apply" button in the Extended VE table patch box.
It won't me apply the extended VE table patch - I'm getting an dialog box with an error message that says "Patch aborted. Base data does not match." when I click the "apply" button in the Extended VE table patch box.
- Attachments
-
- SUB2_1A.bin
- (56 KiB) Downloaded 339 times
-
- Posts: 321
- Joined: 2021 Feb 16, 15:53
- Location: Victoria, BC, Canada
- Vehicle Information: 1994 Flarside, XLT, 351w E4OD
SD48b, Quarter Horse, Burn2
Re: SUB2 stock bin - '95 4.9L E4OD
Need your xdf file as well
-
- Posts: 113
- Joined: 2021 Nov 08, 22:24
- Location: North Central IL
- Vehicle Information: 1994 F-350 CCLB 7.5/ZF/4wd
1995 F-250 RCLB 4.9/T18/4wd
2000 Excursion 6.8/4R100/4wd
2001 Ranger RCSB 2.3/M5OD/2wd - turbocharged
2007 Town Car 4.6/4R75E
2011 Ranger SCSB 2.3/M5OD/2wd
wbo2_aem_uego
Re: SUB2 stock bin - '95 4.9L E4OD
I'm using the xdf you posted dated 6-8-2023 back on page 5
-
- Posts: 321
- Joined: 2021 Feb 16, 15:53
- Location: Victoria, BC, Canada
- Vehicle Information: 1994 Flarside, XLT, 351w E4OD
SD48b, Quarter Horse, Burn2
Re: SUB2 stock bin - '95 4.9L E4OD
Stock SUB2 bin and posted XDF work fine.
I will see if I can replicate your issue with your posted bin.
I will see if I can replicate your issue with your posted bin.
-
- Posts: 321
- Joined: 2021 Feb 16, 15:53
- Location: Victoria, BC, Canada
- Vehicle Information: 1994 Flarside, XLT, 351w E4OD
SD48b, Quarter Horse, Burn2
Re: SUB2 stock bin - '95 4.9L E4OD
It's already applied to your bin.
For whatever reason, initial load of your bin, TunerPro doesn't recognize that it is applied.
You click apply, you get the error.
If you click remove, apply, then apply patch appears to be OK.
Maybe version conflicts with TunerPro?
I am using build 5.00.9827.00
For whatever reason, initial load of your bin, TunerPro doesn't recognize that it is applied.
You click apply, you get the error.
If you click remove, apply, then apply patch appears to be OK.
Maybe version conflicts with TunerPro?
I am using build 5.00.9827.00