VE Clarification

S/D specific subforum for the Gen-1 Lightnings,
88- Tbird/Stang/Lincoln/Mercury, RV's, and Trucks.

VE Clarification

Unread postby Mikestang » Fri Oct 25, 2019 5:25 pm

Im pretty sure but wanted to ask again. Tuning the VE table, the Y axis FN031 is MAPOPE correct? Finally some WOT tuning and wanted to clarify.
Everyday I learn how much I don't know....
User avatar
Mikestang
General Poster
 
Posts: 89
Joined: Mon Oct 14, 2013 7:58 pm
Location: Firestone, CO
Name: Mike
Vehicle Information: 1986 Ford Mustang GT, Sonic Blue
347 Stroker, custom cam, 185 CNC Trick Flow heads w/PAC springs
Trick Flow upper and lower extrude honed
(many more mods...)
Moates QH chip
Binary Editor software w/Innovate software
A3M1
Vehicle 2 Information: 1981 Mustang SCCA A-Sedan car Restored by Me
86 Capri EFI 5.0L Engine
Mostly Stock, F-cam, Valvetrain upgrades, Long Tube headers
DA1 PCM, Using BE and QH with Innovate AFR

Re: VE Clarification

Unread postby decipha » Sat Oct 26, 2019 8:36 am

correct
User avatar
decipha
Tooner
 
Posts: 18231
Joined: Mon Jul 15, 2013 5:29 pm
Location: New Orleans, LA
Name: Michael Ponthieux
Vehicle Information: Supercoupin' x10
90 (4x 5spds) - Dante, Ruby, Daja, Ava
91 4r70w - Skarlett
92 (2x) 5spd & auto - Bianqa, Andrea
93 auto - Danika
94 5spd Rionda
95 auto Aisha
Vehicle 2 Information: Others:
00 Lincoln LS - Luanda
98 Camaro SS - Bounquisha
02 Harley F-150 - Sasasha
03 Marauder - DyShyKy
00 Explorer 5L - Bernyce
07 GMC 2500HD 6L - Veranafer

Re: VE Clarification

Unread postby mustangdriver » Fri Nov 01, 2019 5:05 am

In tunerpro it looks like this: --->
capture_01112019_114304.jpg
capture_01112019_114454.jpg
capture_01112019_114507.jpg


I dont have FN031. Can you take a screenshot?
You do not have the required permissions to view the files attached to this post.
my english is not good, but my Mustangs are top :)
User avatar
mustangdriver
General Poster
 
Posts: 29
Joined: Tue May 14, 2019 2:19 pm
Location: Germany, Saxony, Leipzig
Name: Tobias
Vehicle Information: 87 LX convertible 2.3 FB1 5 speed manual FB1 now DA1
Vehicle 2 Information: 79 V8 347cui
Edelbrock Heads, Carb, Manifold, V2a Headers, X-pipe, 340HP

Re: VE Clarification

Unread postby Mikestang » Thu Nov 07, 2019 6:20 pm

[quote="mustangdriver"]In tunerpro it looks like this: --->
capture_01112019_114304.jpg
capture_01112019_114454.jpg
capture_01112019_114507.jpg


I dont have FN031. Can you take a screenshot?[/qu

Sorry, I missed this, I only check here about once a week. I have never done that, but I can try. Sorry, I have never used TunerPro, I use Binary Editor
Everyday I learn how much I don't know....
User avatar
Mikestang
General Poster
 
Posts: 89
Joined: Mon Oct 14, 2013 7:58 pm
Location: Firestone, CO
Name: Mike
Vehicle Information: 1986 Ford Mustang GT, Sonic Blue
347 Stroker, custom cam, 185 CNC Trick Flow heads w/PAC springs
Trick Flow upper and lower extrude honed
(many more mods...)
Moates QH chip
Binary Editor software w/Innovate software
A3M1
Vehicle 2 Information: 1981 Mustang SCCA A-Sedan car Restored by Me
86 Capri EFI 5.0L Engine
Mostly Stock, F-cam, Valvetrain upgrades, Long Tube headers
DA1 PCM, Using BE and QH with Innovate AFR

Re: VE Clarification

Unread postby mustangdriver » Wed Dec 11, 2019 5:00 am

...can you take a screenshot from BE? ;)
my english is not good, but my Mustangs are top :)
User avatar
mustangdriver
General Poster
 
Posts: 29
Joined: Tue May 14, 2019 2:19 pm
Location: Germany, Saxony, Leipzig
Name: Tobias
Vehicle Information: 87 LX convertible 2.3 FB1 5 speed manual FB1 now DA1
Vehicle 2 Information: 79 V8 347cui
Edelbrock Heads, Carb, Manifold, V2a Headers, X-pipe, 340HP


Return to Speed Density Tuning

Who is online

Users browsing this forum: No registered users and 2 guests