Simple ? - Speed Density works w/ A9L2 Right?

Decipha's custom GUFX strategy covers all 89-93 foxbody ecu's including the 88 mass-air california ecus.
entity-unknown
Posts: 80
Joined: 2022 Aug 04, 00:13
Location: Mesa, AZ
Vehicle Information: 87 Bronco FSB Eddie Bauer w/ 89 Mustang MAF Swap / C3W PCM w/ A9L2 BIN from Decipha / 347 FRPP BOSS Block (Part# M-6009-347) / AFR 165cc heads / 42Lbs Green(Active) & 30Lbs Red(Shelf) Bosch Injectors / CompCams 35-510-8/FW XE258HR-12 / AOD fully beefed up / King 2.5" Suspension w/ Bump Stops / 5.13 Gears Front/Rear on Auburn Pro LSD / 35"(Active)/33"/37" Tires / Very Custom Built Bronco aka Bonnie

Simple ? - Speed Density works w/ A9L2 Right?

Unread post by entity-unknown »

I see the functions for MAP but since it's not relative to me, I haven't played with those. My friend wants to tune his Speed Density setup tho.

So can I load the A9L2 up for him and tune I gather the Volumetric Efficiency / MAP stuff?
efloth
Posts: 274
Joined: 2021 Feb 15, 22:12
Location: Sacramento CA
Vehicle Information: 1991 F150 4.9L J1X 80lb Injectors E85
1995 F150 5.8L MOB1

Re: Simple ? - Speed Density works w/ A9L2 Right?

Unread post by efloth »

I think you'd want to use A1C for that
decipha
Posts: 4952
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: Simple ? - Speed Density works w/ A9L2 Right?

Unread post by decipha »

Speed density ecu's are a different hardware class than mass air ecus so no you cannot run the a9l2 cal on it.

Plug in his hardware code in the search box on the supported ecus list and it will let you know if its supported and by what strategy.

http://www.efidynotuning.com/downloads.htm
rusty_lawrence
Posts: 86
Joined: 2021 Jun 03, 14:46
Location: New Orleans
Vehicle Information: 1994 F150 Lightning
WAY1 / SMD-221
408w / AFR heads / Ported GT40
Novi 2000 intercooled S/C

Re: Simple ? - Speed Density works w/ A9L2 Right?

Unread post by rusty_lawrence »

decipha wrote: 2023 Oct 03, 08:07 Speed density ecu's are a different hardware class than mass air ecus so no you cannot run the a9l2 cal on it.

Plug in his hardware code in the search box on the supported ecus list and it will let you know if its supported and by what strategy.

http://www.efidynotuning.com/downloads.htm
i know this is an exception... but... that marine setup i been playing with violates this rule. the marine bin is SD and the automotive bin is MA. So one hardware code EFI-MA39 has oem cals for SD and MA. and definitions out there for both.

Nothing to do with the topic, sorry, but sharing something cool i learned when playing with it.
decipha
Posts: 4952
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: Simple ? - Speed Density works w/ A9L2 Right?

Unread post by decipha »

Yeah but thats not a production cal its something correctcraft and ford had going on. One of their many side adventures like the manlifts and what not.
entity-unknown
Posts: 80
Joined: 2022 Aug 04, 00:13
Location: Mesa, AZ
Vehicle Information: 87 Bronco FSB Eddie Bauer w/ 89 Mustang MAF Swap / C3W PCM w/ A9L2 BIN from Decipha / 347 FRPP BOSS Block (Part# M-6009-347) / AFR 165cc heads / 42Lbs Green(Active) & 30Lbs Red(Shelf) Bosch Injectors / CompCams 35-510-8/FW XE258HR-12 / AOD fully beefed up / King 2.5" Suspension w/ Bump Stops / 5.13 Gears Front/Rear on Auburn Pro LSD / 35"(Active)/33"/37" Tires / Very Custom Built Bronco aka Bonnie

Re: Simple ? - Speed Density works w/ A9L2 Right?

Unread post by entity-unknown »

Unfortunately his ECM doesn't have a catch code (cheap reman) but def notable, no A9L2 for him ;)
I'll look more into the A1C and the other BINs to see what will work for him. Thank You!
decipha
Posts: 4952
Joined: 2021 Feb 15, 12:23
Location: Metairie, LA
Vehicle Information: Work Truck
'19 F-150 3.3L

Re: Simple ? - Speed Density works w/ A9L2 Right?

Unread post by decipha »

what year make model is his vehicle ?
Post Reply