Page 1 of 1

EecEditor Def Files

Unread postPosted: Sun Jan 28, 2018 10:04 am
by decipha
anyone still using eec editor?

I was cleaning up my laptop uninstalling old programs i haven't used in a while and opened it up to check it out as I haven't used it in forever. I don't have any def files for it though so I couldn't do much. Anyone still actively using it?

Re: EecEditor Def Files

Unread postPosted: Sun Jan 28, 2018 9:32 pm
by adfosterm3
I downloaded it. Have a host of defs but only activated for cdan4, reac4 (they had it) and ryaf1.


Opens bins and.modifirs great, when program opens it shows the Quarterhorse attached but when I try to pull a bin or upload it says it can't open the comport... pretty sure it's a Windows 8.1 incompatibility. Working on getting a xp laptop to try again so I can tune my sport Trac while I putt around at trying to Dissemble and make an xdf formit

Re: EecEditor Def Files

Unread postPosted: Mon Jan 29, 2018 8:35 am
by decipha
do u have the latest ftdi drivers? do u have the com port assigned manually?

Re: EecEditor Def Files

Unread postPosted: Mon Jan 29, 2018 5:42 pm
by adfosterm3
Windows 8.1. Tried 2.12 and 2.08 ftdi.

Even tried compatibility mode for so in case it was a software later disconnect.

Manual assigned com port through device.manager and advanced adapter properties. Tried on manual com1 and 5. When I open eec editor it shows the Quarterhorse as attached, but when I try to upload or pull bin states cannot open com port and no eec tuner board attached. Go to help and comm port analyser, shows no com ports

Re: EecEditor Def Files

Unread postPosted: Tue Jan 30, 2018 10:51 am
by decipha
well fuck

Re: EecEditor Def Files

Unread postPosted: Thu Feb 01, 2018 12:41 am
by adfosterm3
Turns out my problem was my laptop. I have 2 QH and it randomly decided to say it couldnt connect or recognize both. Was able to connect to them with roommates tablet. Went and purchased a new 10.1 windows tablet and im back in business. Will be testing eec editor tomorrow with it.

Only problem Im having with the new tablet is the datalogging either shows blank fields or a little red square with no writing after downloading the new xdf and eec v universal adx. Tried to go back to using my old file I was using and it just shows random data, mostly peak values, with an occasional flicker of numbers or update.

Re: EecEditor Def Files

Unread postPosted: Thu Feb 01, 2018 9:49 pm
by decipha
what strategy are u using?

Re: EecEditor Def Files

Unread postPosted: Fri Feb 02, 2018 2:46 pm
by adfosterm3
Was using the eec V with univ ads. Also tried using my old fgfb2 files I got off site oct 2016. I'll try to get ya a screenshot

Re: EecEditor Def Files

Unread postPosted: Fri Feb 02, 2018 4:58 pm
by decipha
that explains it, the problem is on my end, i revised the universal adx but didnt update the fbfg2 xdf for the logging changes

ive revamped the universal adx numerous times since its release this time last year, yet again today im revamping it finally for its last rendition to speed up the logging process and make it easy and yet universal still.

for the time being use the universal adx closest to the date of your fbfg2 xdf, u can see the archived downloads link under the downloads section on the homepage