EFIDynoTuning Forum

Hello guys. I have 03 mach1, need tune my pcm. Have anyone stock 03 mach1 binary converted to FBGI0 please? I dont have FBFG2 strategy for RYAK1 in tuner pro, ryak1 not properly displayed parameters with FBGI0.

If you find one let me know. But i used the 03/04 cobra bin thats posted at the top of this category. Its close enough to get the car running. Im completely new to the mod motor stuff and its not in the budget to pay for a premium membership and let Decipha remote tune so im learning as i go. Good luck with the search!

bad86capri wrote: ↑2022 Nov 26, 17:13 If you find one let me know. But i used the 03/04 cobra bin thats posted at the top of this category. Its close enough to get the car running. Im completely new to the mod motor stuff and its not in the budget to pay for a premium membership and let Decipha remote tune so im learning as i go. Good luck with the search!

I have relatively stock car, only need adjust some parameters, maybe FBFG2 strategy works on our cars, not actual but for some adjust could by done but FBFG2 can not find too...maybe somebody still have FBFG2 in laptop?

My car is stock with longtube headers, X-pipe and 01 cobra intake cams. right now ive put 10 miles on it without the QH and im only running on 1 factory o2. its running the greatest as one can imagine. lol. hopefully tomorrow after church ill have time to put the QH in and start it with the FBGIO/MGZT bin and start tuning.

Same. Stock engine only comp cams, xpipe. Car run without problems with stock ecu.

Only idle rpm and timing idle need adjust.

Thanks sooo much to DECIPHA for mach bins

np