on spray

Forum for racing results, dyno pulls, track vids, etc... include time slip and/or link(s) to video(s) if you have them

on spray

Unread postby g3mustang » Fri Jun 26, 2015 3:36 pm

I made one run last friday night.

331 cheap aluminon heads anderson cam 9.0.1 compression ratio spraying a 175 shot


car went 12.1 at 119mph. came out the hole baby soft. I was happy with the mph so really didnt push it again.


On the way home i took out a new 5.0 from a third gear roll lol felt pretty good
g3mustang
Supporting Member
 
Posts: 764
Joined: Mon Oct 14, 2013 1:16 pm
Location: Springfield, Missouri
Name: gary spaniak
Vehicle Information: 393 s475 b/w turbo 9:1 compresion 185 afr heads c4 trans a9l2 tunning with BE e85

331 180 heads, cobra intake, 50lb injec., cobra maf, anderson cam

Re: on spray

Unread postby decipha » Fri Jun 26, 2015 4:16 pm

nice, you got any vids?
User avatar
decipha
Tooner
 
Posts: 18494
Joined: Mon Jul 15, 2013 5:29 pm
Location: New Orleans, LA
Name: Michael Decipha Ponto
Vehicle Information: Supercoupin' x10
90 (4x 5spds) - Dante, Ruby, Daja, Ava
91 4r70w - Skarlett
92 (2x) 5spd & auto - Bianqa, Andrea
93 auto - Danika
94 5spd Rionda
95 auto Aisha
Vehicle 2 Information: Others:
00 Lincoln LS - Luanda
98 Camaro SS - Bounquisha
02 Harley F-150 - Sasasha
03 Marauder - DyShyKy
00 Explorer 5L - Bernyce
07 GMC 2500HD 6L - Veranafer

Re: on spray

Unread postby g3mustang » Fri Jun 26, 2015 6:39 pm

A crappie one how can I share a link.
g3mustang
Supporting Member
 
Posts: 764
Joined: Mon Oct 14, 2013 1:16 pm
Location: Springfield, Missouri
Name: gary spaniak
Vehicle Information: 393 s475 b/w turbo 9:1 compresion 185 afr heads c4 trans a9l2 tunning with BE e85

331 180 heads, cobra intake, 50lb injec., cobra maf, anderson cam

Re: on spray

Unread postby decipha » Fri Jun 26, 2015 6:46 pm

just post the link
User avatar
decipha
Tooner
 
Posts: 18494
Joined: Mon Jul 15, 2013 5:29 pm
Location: New Orleans, LA
Name: Michael Decipha Ponto
Vehicle Information: Supercoupin' x10
90 (4x 5spds) - Dante, Ruby, Daja, Ava
91 4r70w - Skarlett
92 (2x) 5spd & auto - Bianqa, Andrea
93 auto - Danika
94 5spd Rionda
95 auto Aisha
Vehicle 2 Information: Others:
00 Lincoln LS - Luanda
98 Camaro SS - Bounquisha
02 Harley F-150 - Sasasha
03 Marauder - DyShyKy
00 Explorer 5L - Bernyce
07 GMC 2500HD 6L - Veranafer

Re: on spray

Unread postby g3mustang » Mon Jun 29, 2015 10:32 am

g3mustang
Supporting Member
 
Posts: 764
Joined: Mon Oct 14, 2013 1:16 pm
Location: Springfield, Missouri
Name: gary spaniak
Vehicle Information: 393 s475 b/w turbo 9:1 compresion 185 afr heads c4 trans a9l2 tunning with BE e85

331 180 heads, cobra intake, 50lb injec., cobra maf, anderson cam

Re: on spray

Unread postby JETFAST » Wed Jan 13, 2016 1:59 pm

i know this is a little old, but can you tell us about your set up? wet or dry? what changes have you made in your tune. I see different people doing it different ways. thanx.
JETFAST
General Poster
 
Posts: 50
Joined: Tue Dec 22, 2015 3:44 pm
Vehicle Information: Horsepower Breader

Re: on spray

Unread postby g3mustang » Tue Jan 19, 2016 11:19 pm

I used a dry setup and used the load scaling function for the fan switch to activate it
g3mustang
Supporting Member
 
Posts: 764
Joined: Mon Oct 14, 2013 1:16 pm
Location: Springfield, Missouri
Name: gary spaniak
Vehicle Information: 393 s475 b/w turbo 9:1 compresion 185 afr heads c4 trans a9l2 tunning with BE e85

331 180 heads, cobra intake, 50lb injec., cobra maf, anderson cam


Return to Racing & Dyno Results

Who is online

Users browsing this forum: No registered users and 1 guest

cron