EFIDynoTuning Forum

I figured it out.

Let me rephrase that question. How do i create a new folder in the tree view to move the main tuning parameters to?

Im working with the FBGI0 BIN.
Is there a way to make a new branch in the tree and add all of the important tuning parameters in one location like GUFx has it?

OK. After reading the fuel write-up again its still not making sense to me why it would be commanding the .70 lambse. ive opened up the tune and cant figure out table is making is making changes to the base fuel table. The closed loop flag is set and i was at 150 degrees.

Good deal. I was confused because of the lambse being .68-.71. I was expecting lambse to be coming from the fuel table.

Heres the BIN

I was going over one of my old logs and came across something interesting. Im running the FBGI0. At Idle, Lambse was .68-.71, lambda was .70 and Fuel_Error1 was 1.38-1.49 and KAMS were 1.00 and not moving. Can somebody help me understand what was going on here? Or explain to me how this works?

How hard is it to re-organize the tree view?

I just reread the fuel write-up. I shouldve done that before posting! I guess i will be putting the wideband back in this weekend. In the meantime im going to use KAMS to dial in the lower half of the curve. Thanks for the reply.

Alright im back to tuning on my Mach, or at least getting to start once i get time. I have a few questions regarding the factory bin. The first question is about the timing table. Its commanding 50 degrees at low loads in the cruising area of the table. Is this normal? Second is the K-Constant is set to 24.265. Should this be changed to 30 and then the rest of the injector data be updated? Third i understand how to dial in the bottom part of the curve using fuel trims but can WOT be dialed in using fuel trims or should drill and weld a bung in for my wideband?