Search found 321 matches
- 2024 May 02, 20:32
- Forum: A1C - 80/90s EFI-SD4x Speed Density
- Topic: 5.8L Belt Tensioner
- Replies: 3
- Views: 673
Re: 5.8L Belt Tensioner
Get one with a metal pulley not plastic
- 2024 Apr 20, 15:38
- Forum: Hardware, Programming & Disassembly
- Topic: best new laptop for $500
- Replies: 12
- Views: 3736
Re: best new laptop for $500
I’ve always had dells, my 13” dell xps is perfect, cost around 1200, going on 7 years, has windows 11, just upgraded to 2TB hard drive
- 2024 Apr 17, 18:34
- Forum: Hardware, Programming & Disassembly
- Topic: EESucka - found on ebay
- Replies: 9
- Views: 1810
Re: EESucka - found on ebay
Yeah, I’m still thinking the same, but my research showed max uv erase/reprogram on these chips will only happen 50 to max 100 times then they fail completey
- 2024 Apr 17, 10:59
- Forum: Hardware, Programming & Disassembly
- Topic: EESucka - found on ebay
- Replies: 9
- Views: 1810
Re: EESucka - found on ebay
The notes include the original schematics, same as scanned in links above, other than a couple sticky notes.
Also has a print out of original MS .bas code.
I got it just for the fact it’s old, cool and geeky fun.
Also has a print out of original MS .bas code.
I got it just for the fact it’s old, cool and geeky fun.
- 2024 Apr 16, 08:57
- Forum: Hardware, Programming & Disassembly
- Topic: EESucka - found on ebay
- Replies: 9
- Views: 1810
Re: EESucka - found on ebay
This is the original, came with a binder of notes.
- 2024 Apr 15, 20:22
- Forum: Hardware, Programming & Disassembly
- Topic: EESucka - found on ebay
- Replies: 9
- Views: 1810
EESucka - found on ebay
Look what I bought, currently in my possession:
- 2024 Apr 10, 13:21
- Forum: The Range
- Topic: Is The Site Down??
- Replies: 6
- Views: 5008
Re: Is The Site Down??
The website is not https, use only http
- 2024 Apr 05, 01:32
- Forum: A1C - 80/90s EFI-SD4x Speed Density
- Topic: 1993 F150 4x4 - Trans Tooning
- Replies: 32
- Views: 4443
Re: 1993 F150 4x4 - Trans Tooning
My rebuilt e4od slams into 3rd wot high rpm.
I drilled out second and third in the accumulator plate,
2nd needs more, 3rd is almost too much.
I think I can turn down pressure in shifts?
I drilled out second and third in the accumulator plate,
2nd needs more, 3rd is almost too much.
I think I can turn down pressure in shifts?
- 2024 Mar 23, 20:02
- Forum: Additional Support
- Topic: Marine definition
- Replies: 20
- Views: 7687
Re: Marine definition
Sweet, thanks, downloaded!
I live at sea level, might put a 351 in a boat one day.
I'll continue tinkering with these.
I live at sea level, might put a 351 in a boat one day.
I'll continue tinkering with these.
- 2024 Mar 15, 08:35
- Forum: Speed Shop & Engine Talk
- Topic: 351w 36-1 alignment
- Replies: 22
- Views: 2810
Re: 351w 36-1 alignment
Nope, not for OBD1 as far as I know.
Original for older EEC-III units, and some EEC-V, as far as I know.
The 28oz balancers with a 4 point miss-fire ring were on some 1981 302s, and some 1981-?? 351w, part number E1TE-C3A
Then some 1996 351w E series and F series, mostly California I believe had the same 28oz balancer with the miss-fire 4-point ring, part number F6TE-JA.
Original for older EEC-III units, and some EEC-V, as far as I know.
The 28oz balancers with a 4 point miss-fire ring were on some 1981 302s, and some 1981-?? 351w, part number E1TE-C3A
Then some 1996 351w E series and F series, mostly California I believe had the same 28oz balancer with the miss-fire 4-point ring, part number F6TE-JA.