Search found 165 matches
- 2024 May 04, 13:20
- Forum: FBGI0 - 02-04 Mustangs (ALL)
- Topic: Base Idle Reset
- Replies: 2
- Views: 136
Re: Base Idle Reset
Thanks decipha. I've used this method for the cars with the spout connector for years now but wasn't sure if there was another method for coil on plug cars.
- 2024 May 02, 09:37
- Forum: FBGI0 - 02-04 Mustangs (ALL)
- Topic: Base Idle Reset
- Replies: 2
- Views: 136
Base Idle Reset
Is there a proper procedure for a base idle reset on 99-04 mustang gt/ mach 1?
- 2023 Nov 28, 11:56
- Forum: The Range
- Topic: Is The Site Down??
- Replies: 6
- Views: 4533
Re: Is The Site Down??
I work at a national lab and they have the web browsers locked down for the most part, so that may be it.
- 2023 Nov 28, 11:52
- Forum: FBGI0 - 02-04 Mustangs (ALL)
- Topic: RPM Flare on Cold Start
- Replies: 4
- Views: 2155
Re: RPM Flare on Cold Start
97 lincoln short block, 04 C heads, 01 cobra cams, longtube headers and a x-pipe. Its a 5 speed car. The egr, rear o2s and knock sensors are deleted. The knock sensor harness was cut when i got the car and i had a hard time tracking down one so i left them out. The car runs good on the stock tune. Good drivability, averages around 20mpg.
- 2023 Nov 27, 14:33
- Forum: The Range
- Topic: Is The Site Down??
- Replies: 6
- Views: 4533
Is The Site Down??
When i try to access the homepage to read the write-ups I get the "something cool is coming" or site is under construction.
- 2023 Nov 27, 14:23
- Forum: FBGI0 - 02-04 Mustangs (ALL)
- Topic: RPM Flare on Cold Start
- Replies: 4
- Views: 2155
Re: RPM Flare on Cold Start
On the declutch stalling issue, would i need to kick up FN894 Daspot MIN Clip at 800 rpm?
- 2023 Nov 27, 14:16
- Forum: FBGI0 - 02-04 Mustangs (ALL)
- Topic: RPM Flare on Cold Start
- Replies: 4
- Views: 2155
RPM Flare on Cold Start
For starters my 03 Mach is still running off the stock tune. Im hoping to have time in the coming days to start tuning it again. I feel i have all the mechanical bugs worked out and im at a good point to start tuning. The first thing i want to address is the RPM flare on cold starts. When it first starts the rpm will flare up to around 2200rpm. This may be normal but seems high to me. Do i need to adjust CRANK ISCDTY to bring down the rpm? The other issue i want to address is with the ac compressor running, whether in AC mode or defrost mode, the engine will sometimes, not all the time, stall after the rpm has settled back down after pressing in the clutch and coming to stop. Part of me thinks that there may be to much pressure in the ac system creating a load on the engine but im not sure. The AC blows nice and cold in hot summer heat. Anyway, any advice would great.
- 2023 Nov 07, 10:39
- Forum: The Garage & Build Threads
- Topic: Deciphas 03 Marauder "Dyshyky"
- Replies: 6
- Views: 5321
Re: Deciphas 03 Marauder "Dyshyky"
Hows the marauder working out so far? Ive really thought about parting ways with my mach 1 and getting a marauder. That or an auto Mach 1. Yeah i know im weird for wanting an auto mach over my manual mach.
- 2023 Nov 07, 10:35
- Forum: The Garage & Build Threads
- Topic: 1997 Mountaineer 5.0 for Coil-near-plug swap
- Replies: 43
- Views: 12337
Re: 1997 Mountaineer 5.0 for Coil-near-plug swap
After reading this thead, you got me interested. I will be following!
- 2023 Aug 22, 08:36
- Forum: Moates Support
- Topic: What is Everyone using for Chips Now?
- Replies: 28
- Views: 20372
Re: What is Everyone using for Chips Now?
Do you think the jaybird can be repaired?