I added those last month just hadn't posted an update yet.
y axis is delta ratio
b73a and b75e is between 2 functions
fn2ulk is b73e
fn2lk is b75a
after typing that i realize you probably just swapped the e and the a when you typed it.
attached, prob has some other goodies in it to that I added
Search found 1870 matches
- 2024 May 22, 11:02
- Forum: A1C - 80/90s EFI-SD4x Speed Density
- Topic: A1C XDF Additions
- Replies: 9
- Views: 1856
- 2024 May 22, 10:36
- Forum: A1C - 80/90s EFI-SD4x Speed Density
- Topic: VE table values greater than 1.0
- Replies: 2
- Views: 45
Re: VE table values greater than 1.0
you can plug in all the way to 200
why would you use hex view? Why does the value itself even make any difference?
All I do is multiply each cell by the correction the histogram gives you. Then I make sure they are all in linear order and if not adjust the injector data to make it.
I've broken out a significant amount of A1C in the past couple months alone. Post your current tune and log in your thread and I'll take it from there.
why would you use hex view? Why does the value itself even make any difference?
All I do is multiply each cell by the correction the histogram gives you. Then I make sure they are all in linear order and if not adjust the injector data to make it.
I've broken out a significant amount of A1C in the past couple months alone. Post your current tune and log in your thread and I'll take it from there.
- 2024 May 22, 09:52
- Forum: Moates Support
- Topic: Moates Quarterhorse corrupting tunes - How I solved it!
- Replies: 2
- Views: 48
Re: Moates Quarterhorse corrupting tunes - How I solved it!
I have a whole bunch of quarterhorse's I could have shipped you if you needed one. They are $350 +actual shipping. I ship all over the world so no worries there.
- 2024 May 22, 08:45
- Forum: Additional Support
- Topic: SCT X2
- Replies: 1
- Views: 39
Re: SCT X2
as long as the x2 physically works it shouldn't be a problem
if you have a copy of the old sct updater to load the file please do post it, others were asking about it since sct no longer supports it or has it for download
I don't tune any aftermarket ecu's remotely, I do those in house as they usually always require some finesse and verification.
if you have a copy of the old sct updater to load the file please do post it, others were asking about it since sct no longer supports it or has it for download
I don't tune any aftermarket ecu's remotely, I do those in house as they usually always require some finesse and verification.
- 2024 May 21, 16:11
- Forum: CBAZA - 94/95 Mustang V8 ECUs
- Topic: U4PO swap on Bronco II.. Is Evap solenoid needed?
- Replies: 3
- Views: 131
Re: U4PO swap on Bronco II.. Is Evap solenoid needed?
im not sure how the evap functions on the bronco 2
if theres no purge solenoid then how is the ecu controlling it?
if theres no purge solenoid then how is the ecu controlling it?
- 2024 May 21, 16:09
- Forum: Hardware, Programming & Disassembly
- Topic: Foxbody EEC-V
- Replies: 3
- Views: 102
Re: Foxbody EEC-V
Yeah the 94/95 auto mustang v8 ecu would be much easier and faster to find and swap out. Only would require replacing the tcc solenoid on the valve body with a 1 ohm tcc for a 94-95 mustang v8. Its one retaining bolt that holds it in takes all of 2 seconds to unplug and plug the other in once you drop the trans pan.
but yeah otherwise if going the eec-v route the 96 ecu would be your only option. It would require a custom tune and premium membership though as not enough of it is broken out publicly.
but yeah otherwise if going the eec-v route the 96 ecu would be your only option. It would require a custom tune and premium membership though as not enough of it is broken out publicly.
- 2024 May 02, 20:02
- Forum: A1C - 80/90s EFI-SD4x Speed Density
- Topic: 5.8L Belt Tensioner
- Replies: 3
- Views: 759
Re: 5.8L Belt Tensioner
Is a dorman or the like oem replacement from autozone no good?
- 2024 May 02, 14:54
- Forum: FBGI0 - 02-04 Mustangs (ALL)
- Topic: Base Idle Reset
- Replies: 2
- Views: 865
- 2024 Apr 30, 20:14
- Forum: A1C - 80/90s EFI-SD4x Speed Density
- Topic: MPG Mode + EGR = Excessive Timing
- Replies: 2
- Views: 986
Re: MPG Mode + EGR = Excessive Timing
You dont need to add any timing
- 2024 Apr 30, 10:26
- Forum: A1C - 80/90s EFI-SD4x Speed Density
- Topic: Dyno scheduled, can you lock up converter in drive via tune
- Replies: 3
- Views: 2731
Re: Dyno scheduled, can you lock up converter in drive via tune
yep
its tprel and vehicle speed for lockup
its tprel and vehicle speed for lockup